1648A Power Box Paver

CAT -2.2 T4 49 hp (36.5 kW) diesel engine
COLOR DISPLAY - For viewing and monitoring engine diagnostics
SCREED HEATING - Dual propane system
ADDED STABILITY - Front counterweight provides stability
VARIABLE SPEED CONTROL - Infinite control over travel speed, matching any paving condition
ASPHALT HOPPER FRONT LIP - Retains asphalt in the hopper, minimizing spillage
EXCELLENT SERVICE ACCESS - Engine can be serviced from both sides and provides easy access to hoses and components for simple maintenance

SPECIFICATION	1648A
Overall Height	7' 1"  (2.172 m)
​Transport Width	​8'6" (2.591 m)
Operating Width	​10'5" (3.175 m)
Length	9'7" (2.921 m)
Truck Clearance	23" (.584 m)
​Operating Weight	10,600 lbs. (4808 kg)
Engine Model	CAT
Engine Type	Tier 4 - Diesel
Engine Net Power	​49 hp (36.5 kW) @ 3000 rpm
Fuel Tank	​12.5 gal. (47.3 L)
​Full Floating & Adjustable	8' - 13' (2.438 - 3.962 m)
Vibratory	3000 vpm - maximum
Exhaust-Heated	​N/A
​Propane-Heated	​Standard
​Hydraulic Extensions	​30" (.762 m) w/ 6" (.152 m) wear plate
​Crown / Invert Adjustment	​Single Lever, 0"-3" (0 - .076 m)
Independent Hydraulic Operated Gates	Standard
Gate Cut-Off Plates	​Option, 6"-36" (.152 - .915 m)
​Gravity Flow Asphalt Hopper Capacity	​6 tons (5443 kg)
​Independent Hydraulic Operating Augers	​Located on the Gate or Screed Extension
Speed	​Single, 0 - 130 FPM (0 - 40 m/min)
​Self-Adjusting, Steel Track (mm)	​12" x 3" (.305 x .076 m)
​Counter-Rotating	Standard
Fine Tune Steering Valve	​​Standard
​Track Length	48" (1.219 m)
​​Platform	​Isolated Dual-Span
​Controls	​Left and Right Sides
​​Muffler w/Exhaust Diverter Valve	N/A
​Wash-Down Stations	​​Dual, 5.5 gal. (21 L)
Variable Hydrostatic Drive Pump	37.0 gpm (140 L/min)
Hydraulic Auger Drive Pump	10.9 gpm (41.3 L/min)
Hydraulic Cylinder Pump (L/min)	10.9 gpm (41.3 L/min)
​​​Hydraulic Oil Cooler Capacity	32.0 gpm (121.1 L/min)
​​Hydraulic Reservoir	20 gal. (75.7 L)
Paving Width - Minimum	​​2' (.610 m)
​Paving Width - Standard	8' (2.438 m)
Paving Width - Maximum	13' (3.962 m)
​Paving Depth	0" - 6" (0 - .152 m)
Hydraulic Feed Auger	2
Hydraulic Material Flow Gates	2

Full-floating, adjustable and vibratory screeds are standard. The 8’ (2.4 m) length and 13’ (3.9 m) width provide a solid foundation for smooth mats. Beyond 8' (2.4 m),  the 1648 utilizes a fully-heated wear plate.

Independent hydraulically driven augers found on the screed extensions on the 1648 model are efficient at moving material to the end of the extension, allowing for a true 13' (3.9 m) paving experience.

Redesigned hydraulic hose routing system and three test ports make diagnostic access fast and clean. An engine access panel allows unobstructed access to the alternator and starter.

The direct-drive track design is self-cleaning and adjusts tension with a hydraulic cylinder. The track design is resistant to slipping, providing versatility in different sub-base conditions.